6
1. Connect MediaMVP-HD to your TV set
Use the HDMI cable (provided) or the audio video connectors on the back of
MediaMVP-HD to connect to your HD TV set or TV monitor. MediaMVP-HD supports
video resolutions from 480i (standard definition) to 1080p (high definition).
2. Turn on your TV and MediaMVP-HD
The green light will appear on your MediaMVP-HD and you should see the main menu
screen on your TV set.
3. Configure the video format of MediaMVP-HD for your TV set (if necessary)
When using HDMI, MediaMVP-HD automatically configures itself for the video format of
your TV set. Some TV sets cannot be configured automatically and you must therefore
set the video format on the MediaMVP-HD manually.
4. Attach MediaMVP-HD to your network
Plug a network cable into the MediaMVP-HD and then plug this cable into your router.
5. Setup your PC for file sharing or for uPnP
There are two ways to get access to media on your PC: you can either use
uPnP
or
you can set up
shared folders
. If you already have shared folders enabled on your
PC, then you can simply scan for these folders (hit the
‘i’ button
on your MediaMVP-
HD remote control, and go to ‘
Scan for shared folders
’). uPnP needs to be enabled
on your PC. See step 5 for information.
6. Watch your media on your TV!
Use the Hauppauge remote control to navigate through your digital media from a USB
thumb drive or over your home network from your PC. The ‘i’ button on the
Hauppauge remote is the key to searching and sorting media.
Installation overview
