background image

4

LEGAL DISCLAIMERS

If you have any feedback regarding the content of this manual we would
be happy to receive your input. Please do so at the following address:

[email protected]

We have made every effort to ensure that the Text, Pictures and Tables in
this manual, and software programs and hardware are free from errors.
However, we cannot guarantee that errors or omissions do not exist. As a
result, we cannot accept liability for any loss, damage or misunderstan-
ding made directly or indirectly as a result of using our Manual, Software
and/or Hardware.

This manual, as well as the software described in it, is furnished under
license and may be used or copied only in accordance with the terms of
such license. The content of this manual is furnished for informal use only,
is subject to change without notice, and should not be construed as a
commitment by Hauppauge Computer Works Incorporated. Hauppauge
Computer Works Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this book. No part of this publication may
be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or storing in a retrieval
system, or translating into any language in any form without the express
written permission of Hauppauge Digital Europe Sarl.

All manufacturers' names, product names and any registered and unregi-
stered trademarks mentioned in this manual are used for identification pur-
poses only and remain the exclusive property of their respective owners.

Trademarks: 

Hauppauge logo and WinTV product name: Hauppauge Computer Works,
Inc. DEC name and logo: Hauppauge Digital Europe Sarl. Windows, Video
for Windows, NetMeeting and Internet Explorer: Microsoft Corporation.
Pentium is a registered trademark of Intel Corporation. All other trade
names are the service mark, trademark or registered trademark of their
respective holders. 

Copyright 2002 Hauppauge Digital Europe Sarl.

Summary of Contents for DEC 2000-t
















































Reviews: