Haulotte HT132RTJ PRO, Maintenance Book

Page: 44 / 144

44 4000392130 E03.16 USA / GB
HT43RTJ PRO - HT132RTJ PRO
C
- Maintenance
No foreign body in joints or slides
No abnormal gap in joints and slides
Frame, axle, steering system, stabilizers arms ...
No cracks, broken weld, paint chipped
No foreign body in joints or slides
No abnormal gap in joints and slides
Condition of tires/tyres (wear, cutting, damage ...)
Anchor points for handling fixed, undamaged and signalized (if
equipped)
Wheel reducer
Rotation systems : orientation turret, basket and jib
No cracks, broken weld, paint chipped
No foreign body in joints or slides
Lateral gap of extensible structure seems acceptable (test on
slewing system)
Slewing device screw and bolt presence and tightenning (if
equipped)
Pin, pin stop; bearing ...
Presence of the turret pin and its locking device
No abrasion, damage or oxidation of pin, pin stop, bushes and
bearing
No radial gap > 0,5mm on the pin
No bent, cracked or broken pins, pin stops, bushes or bearings
Position and state of bushes and bearing
Pulleys, chains and wire rope
No wear more than 2%
No radial gap > 0,5 mm on the pulleys on the pin
Adjustment and maintenance performed correctly
Cylinder and hydraulic component : pump, filters, manifold
No deformation, visible damage, and broken weld on hydraulic
tank
Absence of foreign body on surfaces
Hydraulic oil level (complete if needed)
No torn or split wire sheaths
Shielding is not apparent
No evidence of chemical damage or corrosion on all cables