Haulotte HT132RTJ PRO, Maintenance Book

Page: 38 / 144

38 4000392130 E03.16 USA / GB
HT43RTJ PRO - HT132RTJ PRO
C
- Maintenance
3 - Daily inspection
The content and method of inspection must be conducted by operators before using the machine, it
includes a visual inspection and functional and security systems testing of the machine.
This inspection is the responsibility of the user.
Each day and before the beginning of a new work period and with each change of operator, the
machine must be subjected to a visual inspection and a complete functional test. This inspection is
called Daily Inspection.
Any repairs required must be performed before the machine is used, its correct operation depends on it.
To tighten loosened hardware, refer to recommended torque value table in maintenance book.
In case of leaks, tighten or replace the damaged part before placing the machine in service.
In case of structural part deformation, cracks, broken weld, paint chipped, replace the part before
placing the machine in service.
Sample of broken welds
Inspection Forms are provided to assist your inspection process.
We recommend these forms to be completed daily and stored to assist with your maintenance
schedule.
Each action is depicted in the daily inspection sheet using the following symbols.
Visual inspection without disassembly Lubrication-Greasing
Functional adjustments /
Checks
To drain off To check by test Tightening
Levelling Systematic replacement
Visual inspection with small disassembly or
movement needed to reach the part.
Replacement is necessary. Proof tests. Need HAULOTTE Services® authorization. For
countries where machines are not subject to controlled periodic
maintenance.