Operation and Maintenance
49
6 -
OPERATING INCIDENTS
RECALL :
Obeying the machine's usage and maintenance instructions
will help to avoid the majority of incidents. Nevertheless these
may happen, and before any work is carried out, it is vital to
check the table in chap. 6, page 51 to see if these are
reported. In this case, you simply need to follow the
instructions.If not, you should contact your HAULOTTE agent
or the After Sales Service of the manufacturer.
Before diagnosing the breakdown, you should check that:
• the fuel tank is not empty,
• the batteries are correctly charged,
• the emergency stop punch buttons on the turret and the platform are
unlocked,
• the relays (platform control lectern - turret cabinet) are correctly inser-
ted into their socket,
• the fuses are not defective or incorrectly inserted.
NOTE :
In the turret cabinet, LEDs show the status of each extension
to check that this is properly activated.
INCIDENTS
PROBABLE CAUSE
SOLUTIONS
The engine
stops
• Leak or air bubble in the fuel
circuit
• Blocked fuel filter
• Dead battery
• Defective printed circuit
fuse (in the electrical cabi-
net)
• Punch buttons are de-
pressed
• Engine in "safe" mode : oil
pressure, overheating, al-
ternator charging
• Burnt-out load indicator
bulb
• Defective engine safety re-
lays (KP1)
• Bad battery and terminal
cable contacts
• Call in After Sales Service
• Change the fuel filter
• Recharge the battery
• Replace defective fuses
• Reset
• See the manufacturer's no-
tice or call in After Sales
Service
• Change the bulb
• Replace the relay(s)
• Unscrew the terminals and
clean these
The engine
stops
Fuel reserve light is on
• Fuel tank is empty
• Fill the tank
Fuel reserve indicator
Summary of Contents for HA 41 PX
