Haulotte HA 41 PX, Operating And Maintenance Instructions Manual

Page: 56 / 82

Operation and Maintenance
44
Caution !
Before dismantling, ensure that the
oil circuit is not pressurised and
that the oil is not too hot.
5.3.2.2 -Powered wheel reduction gear
5.3.2.3 -Steering reduction gear
Photo 16 Wheel reduction gear
• Checking the level:
- Rotate the wheel so that you place 1 stopper (1)
on a horizontal line and 1 stopper (2) on a vertical
line.
- Unscrew the stopper (1) and check the level,
which should be at the height of the orifice, and if
necessary refill the level after unscrewing stopper
(2).
- Retighten the stopper.
• Drainage :
- Rotate the wheel until stopper (2) faces
downward. Unscrew the 2 stoppers and allow the
oil to drain.
- Replace the wheel in the position indicated above
to check the level and refill.
- Retighten the stoppers
1
2
Photo 17 Steering reduction gear
Checking and drainage require that the machine is
positioned on smooth horizontal ground.
• Checking the level:
- Unscrew the refill stopper (rep. 1, Photo 17).
- Remove this and check that the oil level is
between the minimum and maximum levels
indicated.
- Refill the level if required.
- Retighten the refill stopper.
- Drainage:
- Unscrew the refill stopper (rep. 1, Photo 17).
- Unscrew the drainage stopper (rep. 2, Photo 17).
- Allow the oil to drain.
- Retighten the drainage stopper, and refill as
shown above.
- Retighten the refill stopper
1
2
MAXI
MINI