90
4001012670
E 06.20
USA / GB
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N
(C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
E -
Trouble shooting and diagram
1.3 -
T
ROUBLESHOOTING
Diagnosis
Problem
Probable cause
Solution
No movement with the lifting
selector and joystick activated
Faulty selector
Check the movements with lifting selector key set to
ground control box
Replace the selector
Contact HAULOTTE Services®
Faulty joystick
Replace the joystick
Contact HAULOTTE Services®
Not enough hydraulic oil
Top up the oil level
The platform does not lift
The load in the platform is too heavy
(personnel or material)
Reduce the load
Not enough hydraulic oil
Top up the oil level
Tilt or slope exceeding the authorised limit
Do not exceed the authorised limit : Refer to operator
manual
Section B 4.1 - Technical specifications
Outriggers cylinders are wrongly positioned
Stabilize the machine correctly
Batteries more than 80 % empty
Ascent of platform cut off by load calculator
Recharge the battery or batteries
The platform will not lower
The load in the platform is too heavy
(personnel or material)
Reduce the load
Platform lifting and lowering is
jerky
Not enough hydraulic oil
Top up the oil level
No movement with the
selector in driving position
and platform control box
joystick activated
Faulty joystick
Replace the joystick
Contact HAULOTTE Services®
Not enough hydraulic oil
Top up the oil level
Tilt or slope exceeding the authorised limit
Do not exceed the authorised limit : Refer to operator
manual
Section B 4.1 - Technical specifications
The load in the platform is too heavy
(personnel or material)
Reduce the load
The machine races when
lowering
Poorly adjusted or faulty balancing valve
Adjust or replace the balancing valve
Contact HAULOTTE Services®
No movement with joystick
activated
Not enough hydraulic oil
Top up the oil level
Faulty joystick
Replace the joystick
Contact HAULOTTE Services®
Hydraulic pump is making an
abnormal noise
Not enough hydraulic oil
Top up the oil level
Hydraulic pump cavitation
Oil viscosity level is too high
Drain the circuit and replace with the recommended
type of oil
Hydraulic circuit overheating
Oil viscosity level is too high
Drain the circuit
Fill the circuit with the recommended oil
Not enough hydraulic oil
Top up the oil level
The steering system works
irregularly
Hydraulic oil temperature is too low
Perform movements without any load to heat up the oil
The load calculator does not
work
Faulty load calculator
Repair or replace the calculator
Summary of Contents for COMPACT 10
