Haulotte COMPACT 10, Maintenance Book

Page: 39 / 118

39 4001012670 E 06.20 USA / GB
Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N
(C 2632E) - Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
D -
Inspection and maintenance schedule
4 - Periodic inspection
The Periodic inspection is a thorough inspection of the operation and safety features of the machine. This must
take place prior to the sale or resale of the machine and every 1 year. Local regulations may have specific
requirements on frequency, and content of inspections.
This intervention must take place after :
• Extensive dismantling and reassembly
• Repairs involving the machine's essential components
• Any accident causing stress to the machine
This inspection is the responsibility of the owner, and must be conducted by a qualified technician.
Under no circumstances may this inspection replace the control required by local regulations.
Use the detailed program below.
Periodic
Page or
associated
procedure
P
e
riodic OK
NO
K
Corrected
Comments
Chassis assembly : Wheel, reducer, steering, wheel pivot
Check state of tires/tyres and inflations
Batteries
Check the condition of the battery
Hydraulic : oils, filters and hoses
Check the hoses, blocks and pumps, fittings,
cylinders and the tank for the absence of leaks,
deformations and damage
Platform
Test the closure and locking of access platform
Check that the harness anchor points are not
cracked or damaged
Check the quick ties and the good location of the
guardrail