Haug 04.7614.000, Operating Instructions Manual

Page: 7 / 24

2 Safety
7
ATTENTION!
Wetness and moisture may result in
spark-overs and leakage paths.
Damage to the ionizing unit and short-
circuits are a likely consequence.
•
Protect the ionizing units from
moisture and wetness.
•
Never use high-pressure cleaners
to clean the units.
Insertion/removal of the high-voltage
plug into/from the ionizing unit while
the power pack is switched on may
result in contact or separation
sparkovers.
This may result in damage to the
power pack or defects.
•
Always switch off the power pack
before plugging in/unplugging the
high-voltage plug.
Pulling the high-voltage cable of the
ionizing unit may result in gaps at the
contact points within the high-voltage
plug and connection of the unit.
Arcing may occur at the gaps due to
the high voltage. Resulting in damage
to the unit.
•
Do not pull the high-voltage cable.