Failure to follow the instructions above may result in serious injury or
equipment damage. The manufacturer is not liable for damage and
malfunctions resulting from failure to observe these installation and
operating instructions.
In accordance with the regulations in force on the disposal of
waste equipment by private users in the European Union, items
bearing this symbol
MUST NOT
be disposed of with other rubbish. In
this case, the user is responsible for proper disposal by delivering the
device to a designated point, or to the manufacturer who will take
care of its further disposal. Separate collection and recycling of
unnecessary devices helps to protect the environment and ensures
that disposal is done in a way that protects human health and the
environment. This note also applies to waste batteries and
accumulators.
TABLE OF CONTENTS
RECOMMENDATIONS AND PRECAUTIONS........................................................................................................2
2. IMPORTANT SAFETY INSTRUCTIONS.............................................................................................................4
DESCRIPTION AND PRINCIPLE
OF THE OPERATION OF THE CONTROLLER........................................................................................................6
PURPOSE.........................................................................................................................................6
CONTROLLER ADVANTAGES....................................................................................................6
DRIVER INSTALLATION......................................................................................................................................7
1.1.Connecting the limit switch for opening and closing.................................................................7
The limit switch for opening and closing is used to precisely stop the gate in the closed or open
position. Adjust the position of the magnets so that the gate opens and closes accurately. ............7
1.2.Connecting photocells................................................................................................................7
1.3.Connection of the manual control..............................................................................................8
1.4.Pulse generator connection - OPTIONAL.................................................................................8
1.5.Capacitor connection..................................................................................................................8
1.6.Motor connection........................................................................................................................8
1.7.Connection of signal lighting ....................................................................................................8
1.8.Power connection.......................................................................................................................8
CONNECTION DIAGRAM...................................................................................................................................9
SETTING PROGRAMMING...............................................................................................................................10
TRAFFIC LIGHTS........................................................................................................................10
FLASHING ON / OFF (Default: enabled).....................................................................................10
AUTOCLOSE FUNCTION...........................................................................................................11
ENGINE OPERATION PROGRAMMING...................................................................................12
RESTORING DEFAULT SETTINGS - 60s operation without encoder and without deceleration
........................................................................................................................................................14
