ACCESSORIES
HATCO LIMITED WARRANTY
Form No. HBGM-0608
13
1. PRODUCT WARRANTY
Hatco warrants the products that it manufactures (the
“Products”) to be free from defects in materials and
workmanship, under normal use and service, for a period
of one (1) year from the date of purchase when installed
and maintained in accordance with Hatco’s written
instructions or 18 months from the date of shipment from
Hatco. Buyer must establish the Product’s purchase date
by returning Hatco’s Warranty Registration Card or by
other means satisfactory to Hatco in its sole discretion.
Hatco warrants the following Product components to be
free from defects in materials and workmanship from the
date of purchase (subject to the foregoing conditions) for
the period(s) of time and on the conditions listed below:
a) One (1) Year Parts and Labor PLUS One
(1) Additional Year Parts-Only Warranty:
Conveyor Toaster Elements (metal sheathed)
Drawer Warmer Elements (metal sheathed)
Drawer Warmer Drawer Rollers and Slides
Food Warmer Elements (metal sheathed)
Display Warmer Elements (metal sheathed air
heating)
Holding Cabinet Elements (metal sheathed air
heating)
Built-In Heated Well Elements
(metal sheathed)
b) One (1) Year Parts and Labor PLUS Four
(4) Years Parts-Only Warranty on
pro-rated terms that Hatco will explain
at Buyer’s request:
3CS and FR Tanks
c) One (1) Year Parts and Labor PLUS Nine
(9) Years Parts-Only Warranty on:
Electric Booster Heater Tanks
Gas Booster Heater Tanks
THE FOREGOING WARRANTIES ARE EXCLUSIVE
AND
IN
LIEU
OF
ANY
OTHER
WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT
LIMITED
TO
ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR PATENT OR OTHER INTELLECTUAL
PROPERTY RIGHT INFRINGEMENT. Without limiting the
generality of the foregoing, SUCH WARRANTIES DO
NOT COVER: Coated incandescent light bulbs, fluorescent
lights, decorative heat lamp bulbs, coated halogen light
bulbs, halogen heat lamp bulbs, heated glass shelves, glass
components, Product failure in booster tank, fin tube heat
exchanger, or other water heating equipment caused by
liming, sediment buildup, chemical attack or freezing,
Product misuse, tampering or misapplication, improper
installation, or application of improper voltage.
2. LIMITATION OF REMEDIES AND DAMAGES
Hatco’s liability and Buyer’s exclusive remedy hereunder
will be limited solely, at Hatco’s option, to repair or
replacement by a Hatco-authorized service agency (other
than where Buyer is located outside of the United States,
Canada, United Kingdom or Australia in which case
Hatco’s liability and Buyer’s exclusive remedy hereunder
will be limited solely to replacement of part under
warranty) with respect to any claim made within the
applicable warranty period referred to above. Hatco
reserves the right to accept or reject any such claim in
whole or in part. Hatco will not accept the return of any
Product without prior written approval from Hatco, and all
such approved returns shall be made at Buyer’s sole
expense. HATCO WILL NOT BE LIABLE, UNDER ANY
CIRCUMSTANCES,
FOR
CONSEQUENTIAL
OR
INCIDENTAL
DAMAGES,
INCLUDING
BUT
NOT
LIMITED TO LABOR COSTS OR LOST PROFITS
RESULTING FROM THE USE OF OR INABILITY TO
USE THE PRODUCTS OR FROM THE PRODUCTS
BEING
INCORPORATED
IN
OR
BECOMING
A
COMPONENT OF ANY OTHER PRODUCT OR GOODS.
Handles (HBG Model)
Handles are available for the HBG unit. The handles
are field retrofittable and are installed onto each end
of the unit using the following procedure.
1. Remove the three nuts located on the underside
of the glass surface support ring at one end of
the unit.
2. Align the three holes on the handle with the
three studs on the support ring and position the
handle on the studs.
3. Replace the three nuts onto to the studs and
tighten securely.
4. Repeat steps 1–3 to install the other handle
onto the opposite end of the unit.
Figure 12. Handle Installation
Handle
Stud
Nut
All manuals and user guides at all-guides.com
