OPERATION
Form No. HBGM-0608
9
General
Use the following procedure to turn on and operate
the HBG and HBGB units.
Read all safety messages in the IMPORTANT
SAFETY
INFORMATION
section
before
operating this equipment.
Use only wipes, pads, and cleaners designed
specifically for cleaning ceramic glass surfaces.
Using other wipes, pads, or cleaners may
damage ceramic glass surface.
Do not turn on the unit until it has been cleaned
thoroughly.
Do not slide pans across glass surface, use
rough-bottomed pans, or drop anything on
glass surface. Scratching or breakage may
occur. Damage to glass s
NOTICE
WARNING
Power ON/OFF Switch
Thermostat Control
HEATED
BLACK GLASS
Figure 9. Standard Control Panel
urface or breakage of glass caused by misuse is
not covered under warranty.
1. Using an appropriate cleaning wipe or a damp
cloth, clean the glass surface of the unit.
Consistent daily cleaning will keep cleanup easy
as well as protect and preserve the glass
surface of the unit.
2. Plug unit into a properly grounded electrical
outlet of the correct voltage, size, and plug
configuration. See SPECIFICATIONS section
for details.
3. Move the power ON/OFF switch to the ON
position (see Figure 9).
BURN HAZARD: Some exterior surfaces on the
unit will get hot. Use caution when touching
these areas.
4. Turn the thermostat control to the desired
temperature setting.
5. Allow the unit 30 minutes to reach operating
temperature. The Heated Black Glass shelves
have a temperature range of 100° to 200°F (38°
to 93°C).
NOTE: Refer to the
ACCESSORIES
section for
installation and operation information for
HBGB units equipped with the flush-style
remote mounted control panel.
CAUTION
All manuals and user guides at all-guides.com
all-guides.com
