![background image](http://html.mh-extra.com/html/hatco/glo-ray-grssr20-dl-series/glo-ray-grssr20-dl-series_installation-and-operating-manual_2106958008.webp)
Form No. GRSSRDLM-0607
6
OPERATION
WARNING
Plug unit into a properly grounded electrical
outlet of the correct voltage, size and plug
configuration. If the plug and receptacle do not
match, contact a qualified electrician to
determine the proper voltage and size and install
the proper electrical outlet.
CAUTION
Some exterior surfaces on the unit will get hot.
Use caution when touching these areas to avoid
injury.
CAUTION
Unit is not weatherproof. For safe and proper
operation locate the unit indoors where the
ambient air temperature is a minimum of 70°F
(21°C).
WARNING
The Glo-Ray
®
Round Heated Stone Shelf with
Display Lamp is not waterproof. To avoid
electrical shock or personal injury DO NOT
submerge in water. Do not operate if it has been
submerged in water.
1. Plug unit into a properly grounded electrical outlet
of the correct voltage, size and plug
configuration. See
SPECIFICATIONS
for details.
2. Place the Power ON/OFF Switch in the ON
position. See Figure 6. The heat bulb will light
when the unit is energized.
3. Turn the thermostat to the desired heated stone
base temperature setting. Base temperature
range is 100° – 200°F (38° – 93°C).
4. Allow unit 30 minutes to reach operating
temperature.
Figure 6. Controls
Power ON/OFF
Switch
Shelf
Thermostat
Power
Cord
Summary of Contents for GLO-RAY GRSSR20-DL Series
Page 14: ...Form No GRSSRDLM 0607 12 NOTES ...
Page 15: ......