FLEXESERVE® | Flexeserve Hub® - North America | Quick Start Guide │ V1 DEC 2020 | 40003232
Page | 1 of 2
Flexeserve® Customer Support
[
t
]
Call Toll-Free
833 955 8300
[
e
Flexeserve Hub® - North America
For full details on how to operate this equipment
safely, please refer to the Operation manual.
WARNING
In an emergency, switch off the appliance and isolate
fully from the mains supply.
CAUTION
The internal surfaces will become hot, reaching
temperatures above 158°F (70°C).
Operation
Heating
Each of the model variants are supplied with a mains power switch and a controller. The controls are located
behind the front panel at the top of Flexeserve Hub
®
.
Set the mains power switch to the ‘I’ position and the controller will illuminate. The display will show the
current temperature. The equipment will begin to heat and reach the established temperature set-point
automatically, generally 185°F (85°C). To switch off the unit, set the power switch to the ‘OFF’ position.
Adjusting Temperatures
To view the temperature of the unit, press the ‘temperature’ button for half a second, and then release. To
change the temperature of the unit, press and hold the ‘temperature’ button and press the arrow buttons to
increase (
▲
) or decrease (
▼
) the temperature. When the ‘temperature’ button is released, the new value is
stored.
Power switch
I = On position
O = Off position
Controller display
Temperature
button
Temperature
adjustment
