Form No. GRCMWHIM-0907
6
INSTALLATION
Figure 7. Installing Pan Skirt
Pan Skirt
Hole
ASSEMBLY (CONTINUED)
Installing the Pan Skirt (See Figure 7)
Position the two holes on the pan skirt over the base
pins located at the rear, inside of the unit.
Installing the Breath Protector (See Figure 8)
1. Remove protective paper from polycarbonate
surfaces.
2. Remove four (4) thumbscrews and washers from
top of unit.
3. Position breath protector on top of unit, matching
holes in breath protector to the holes in the
standoffs on top of the unit.
4. Place a washer (previously removed) in each
breath protector hole.
5. Secure with thumbscrews - Do not over tighten.
Figure 8. Installing Breath Protector
Thumbscrew
Breath
Protector
Washer
Standoffs
