Form No. GRCMWHIM-0907
4
INSTALLATION
UNPACKING
The Glo-Ray
®
Merchandiser is shipped with most
components pre-assembled. Care should be taken
when unpacking shipping carton to avoid damage to
unit and components enclosed.
WARNING
To prevent any injury or damage to the unit do
not pull unit by power cord.
WARNING
To prevent any injury, discontinue use if power
cord is frayed or worn and contact Authorized
Service Agent to replace it.
1. Remove the unit from the carton.
2. Remove information packet. To prevent delay
in obtaining warranty coverage, fill out and
mail the warranty card.
3. Remove tape and protective packaging from all
surfaces of unit.
NOTICE
Do not lay unit on the side with the control panel
or damage to the unit could occur.
NOTICE
Do not drag or slide the unit when moving or
installing. Carefully lift the unit to prevent the
legs from being damaged.
LOCATION
NOTE: Unit must be transported in the upright
position.
For proper operation and maximum performance,
locate the unit in an area where the ambient air
temperature is constant and is a minimum of 70°F
(21°C). Areas which are susceptible to active air
movements or currents should be avoided, i.e., near
exhaust fans or hoods and air conditioning ducts.
CAUTION
Unit is not weatherproof. For safe and proper
operation, locate the unit indoors where the
ambient air temperature is constant and is a
minimum of 70°F (21°C).
WARNING
For safe and proper operation, the unit must be
located at least 1" (25 mm) from combustible
walls and materials. If safe distances are not
maintained, discoloration or combustion could
occur.
CAUTION
To avoid any injury or damage, locate the unit at
the proper counter height, in an area that is
convenient for use. The location should be level
to prevent the unit or its contents from
accidentally falling, and strong enough to
support the weight of the unit and food
displayed.
