INSTALLATION
4. Attachan“S”hooktothecenterofeachconnectingchain.
5. Carefullylifttheunitandattachthe“S”hooksoneachend
oftheunittotheoverheadmountingsystem.Makesure
theunitislevel.
Figure16.“S”HookMounting
“S” Hook
Connecting Chain
Hanger Tab
Screw
Overhead Mounting
System
5. Fastentheanglebrackettotheundersideoftheshelfusing
appropriatefasteners(notsuppliedbyHatco).
NOTE: Two pairs of brackets will be needed for dual units.
Figure15.DualUnitMounting
Chain Suspension Mounting
Mountingaunitwithchainsuspensionattachestheunittoan
overheadsurfacewiththeuseof“S”hooks.
NOTE: Units ordered with the “S” hook option come with two
“S” hooks and two 152 mm (6″) lengths of chain.
Additional chain (P/N 05.03.020.00) can be ordered
from Hatco for the overhead mounting system or
another option can be determined by a qualified
installer.
For installation with chains, make sure the chains have
sufficient strength and are securely fastened to both the
unit and the mounting location. Poorly installed chains
may cause the unit to loosen and fall. Do not place
anything on top of units installed with chains.
Ensure safe and proper operation. Refer to the “Minimum
Clearance Requirements” listed in the Installation section
of this manual.
NOTE: The strength of the chain supplied by Hatco is sufficient
to hold the weight of the unit securely only when
mounted properly.
1. Preparetheoverheadmountingsystemforthe“S”hooks.
Makesurethesystemissecureandissetupsotheunit
willbesuspendedatalevel,safe,andproperdistancefrom
walls,counter,andfood.
2. Loosen,butdonotremovethescrewssecuringthehanger
tabs on each end of the unit. Rotate the tabs up, then
tightenthescrewssecurely.
3. Securelyattachoneofthe152mm(6″)connectingchains
betweeneachpairofhangertabs.
WARNING
Two adjustable
angle brackets
on each end
for dual units.
13
FormNo.GRAIHCEM1-0111