Hatco Glo-Ray GR2SDH-24, Installation And Operating Manual

Page: 15 / 24

Form No. GR2SDM-0707
13
OPERATION
WARNING
To prevent any injury, discontinue use if power
cord is frayed or worn.
WARNING
For safe and proper operation, do not place food
product directly onto hardcoat surface. Food
product must be wrapped, boxed or on a food
pan.
CAUTION
Some exterior surfaces on the unit will get hot.
Use caution when touching these areas to avoid
injury.
The Designer Merchandising Warmer power is
controlled by the ON/OFF toggle switch. (See Figure
6.) The switch must be in the ON position for the unit
to function.
The thermostatically controlled base can be set to any
desired heating level as indicated on the control plate.
NOTE: Main power switch must be in the ON
position for the heated base to function.
NOTE: For units equipped with Indicating
Temperature Control (LED) refer to ACCESSORIES
section of this manual.
HATCO CORPORATION, Milwaukee, WI
80 F
28 C
200 F
93 C
ON OFF
Figure 6. Controls
ON/OFF
Toggle Switch
Thermostat
Control
Indicator
Light