MODEL DESCRIPTION
All Models
Hatco Convected Drawer Warmers are designed to keep foods
hot, flavor-fresh, and crisp until served. They are non-
humidified, single cavity/single temperature controlled units that
provide even, dry heat for food product that does not require
humidity or moisture. Convected Drawer Warmers are
constructed of rugged stainless steel with durable nylon rollers,
12-gauge stainless steel slides, and heavy-duty hardware. The
insulated top and sides of the drawer warmers provide
maximum energy efficiency.
NOTE: Refer to the OPTIONS AND ACCESSORIES section
for additional available features.
Model CDW-3N
The CDW-3N model has three individual drawers that each hold
a full-size food pan up to 6″ (152 mm) deep. It features a digital
temperature controller and a POWER ON/OFF switch that
control the temperature and power for the entire unit.
Model CDW-3N
Digital
Temperature
Controller
POWER ON/OFF Switch
MODEL DESIGNATION
C D W - X N
Convected Drawer Warmer
Quantity of Drawers
Narrow Width Unit
4
Form No. CDWCEM-0412
Plug Configurations
Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the application.
ELECTRIC ShOCk hAzARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage, size,
and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: The specification label is located on the back of the unit.
See label for serial number and verification of unit
electrical information.
WARNING
Plug Configurations
NOTE: Receptacle not supplied by Hatco.
NEMA 5-15P
CEE 7/7 Schuko
BS-1363
AS 3112
SPECIFICATIONS
