manualshive.com logo in svg

Hasselblad Flextight X1, User Manual, Page: 51 / 183

Share
Download
Hasselblad Flextight X1 User Manual Download Page 51

31

Custom Frames

Flextight ships with a selection of original holders that support 

several standard formats of originals. It is also possible to use custom, 

nonstandard formats with Flextight. A larger number of custom frame 

formats can be defined.
To define a 

Custom frame

 do the following:

• Select 

Customize...

 from the 

Frame

 pop-up menu in the main 

FlexColor

 window. The 

Frames

 window appears. 

  The window shows a list of frames relevant to your current scanner. A 

check mark indicates whether or not a frame should be available from 

the 

Frame

 pop-up menu. To add or remove a frame either double-click 

it or select it and click the 

Exclude/Include

 button. The pre-defined 

frames in the list (defined by Hasselblad) are not editable and thus 

marked with a non-edit symbol to the left. 

Summary of Contents for Flextight X1
























































































































































































Reviews:

No comments