115
Using FlexColor with a Feeder
Introduction
Some Flextight scanner models either include or can be fitted with a
batch feeder, which enables you to set up a series of images and then scan
them all at once without needing to stand at the scanner and monitor
progress. As of this writing, the following batch-feeder options are
available:
•
Flextight Batch Feeder:
holds several standard, flexible original holders
of nearly any transparency format. This is an optional add-on for
Flextight 848 and 949 scanners.
•
Mounted Slide Feeder:
holds up to 50 mounted slides. This is an
optional add-on for Flextight 949 scanners.
•
Flextight RF:
a scanner dedicated to scanning roll films. Each exposure
on the roll is saved as a separate file.
Each of these batch-feeder options is specifically supported in FlexColor.
Feeder Mounting and Maintenance
For batch feeders that can be mounted and removed from your scanner,
use the
Maintenance > Feeder
menu command of FlexColor to mount
and maintain your feeder. This command opens the
Feeder
window.
The following controls are available here:
Summary of Contents for Flextight X1
