Hasselblad Flextight X1 User Manual Download

Page: 42 / 183

Save...

(This button changes to a Scan... button when working with

a preview scan in the preview window). Saves an image (as a

standard TIFF ﬁle) from the 3f ﬁle currently displayed in the

FlexColor

window. All current crop, mode, color and image-

enhancement settings will be applied to the saved image. A

history record of the settings used when saving the ﬁle, will be

added to the History list in the 3f ﬁle’s Info window. See “The

Info Window” on page 79 for details.

3f... Scans the entire area of the selected frame or the current

cropping of the preview image and saves it as a 3f ﬁle in the

currently selected folder. The image will be displayed in the

FlexColor

preview window. Please note that the 3f ﬁle will

be scanned using the cropping, resolution and IPTC settings

as speciﬁed in the window that pops up when selecting the

function and on the 3f tab in the

Preferences

window (see

page 55). See “The 3f File Format” on page 10 earlier in this

manual for details.

Previous/Next Image Buttons:

Use these buttons to select

previous or next image from the thumbnails folder.

Batch Scan Button:

Opens the Batch Scan window, from

where you can perform a batch scan, which can be either

several scans from the same preview using diﬀerent crops and

settings or when scanning from the Feeder units (Flextight

848 and 949 only). See “Batch Scanning” on page 109 for more

information.

Thumbnails

Button:

Opens the

Thumbnails

window, which

holds thumbnail images of all of the 3f ﬁles aved in the current

folder. See “The

Thumbnails

Window” on page 65 for more

information.

Setup

Use this pop-up menu to choose between any of the

currently available setups. A small + will appear to the right of

the menu to indicate when you have made custom changes that

aﬀect the setup but have not been saved.

Summary of Contents for Flextight X1
























































































































































































Search results

Summary of Contents for Flextight X1

Reviews:

Related manuals for Flextight X1

Brands by name

Popular brands

Hasselblad Flextight X1, User Manual

Search results

Summary of Contents for Flextight X1

Reviews:

Related manuals for Flextight X1

Brands by name

Popular brands