Hasbro Sega Transformers Shadows Rising, Owner'S Manual

Page: 87 / 170

74
EXPLANATION OF TEST AND DATA DISPLAY
9
The condition of each input device can be checked. Periodically check the condition of each input device on this
screen. Conditions are normal if each device operates and yields output as indicated below.
<Operation>
1
Press the SERVICE Button and move the cursor to the item (output device) you want to test.
2
Whenever the TEST Button is pressed, the display on the right side of the item goes from OFF to ON and
the selected output device operates. Confirm that the device operates normally.
3
Press the SERVICE Button and move the cursor to EXIT.
4
When the TEST Button is pressed, the game test mode menu screen reappears.
<Menu Explanation>
PLAYER1 CONTROLLER X Move the player 1 controller up, down, left and right and the
data (x and y of the controller) varies based on movement.
PLAYER1 CONTROLLER Y
PLAYER1 CONTROLLER
TRIGGER L
Pull the player 1 controller’s left trigger, the item will display
“ON”, release the trigger, the item will display “OFF”.
PLAYER1 CONTROLLER
TRIGGER R Pull the player 1 controller’s right trigger, the item will display
“ON”, release the trigger, the item will display “OFF”.
PLAYER1 START BUTTON Press the player 1 START button - the item will show “ON”
PLAYER2 CONTROLLER X Move the player 2 controller up, down, left and right and the
data (x and y of the controller) varies based on movement.
PLAYER2 CONTROLLER Y
PLAYER2 CONTROLLER
TRIGGER L
Pull the player 2 controller’s left trigger, the item will display
“ON”, release the trigger, the item will display “OFF”.
PLAYER2 CONTROLLER
TRIGGER R Pull the player 2 controller’s right trigger, the item will display
“ON”, release the trigger, the item will display “OFF”.
PLAYER2 START BUTTON Press the player 2 START button - the item will show “ON”
LEVER Push the lever up to show “UP”. Pull down to show “DOWN”
COIN INPUT Shows “ON” when a cab receives a coin or credit
SERVICE Press the SERVICE button - the item will show “ON”
TEST Press the TEST button - the item will show “ON”
FIG. 9-4a INPUT TEST Screen
9-4 INPUT TEST