Hasbro Sega Transformers Shadows Rising, Owner'S Manual

Page: 101 / 170

88
CONTROL UNIT
11
11-1 HOW TO REMOVE CONTROL UNIT
When changing the volume or microswitches in the Control Unit you must first remove the Control Unit. Performing
these operations with the Control Unit still attached is difficult and may damage parts or wires.
The following tools are needed for the following procedure.
- Phillips head screwdriver (for M6)
- Wrench or screwdriver for tamperproof screws (for M4)
- A 7 millimeter spanner, hexagonal screwdriver, or socket wrench
Note: this will display the removal of the Controller Unit for the left side (Player 1). The removal of the right
Controller Unit (Player 2) is identical in terms of fixing removal.
1
Turn off the power
2
Remove the (3) M4x20 screws which secure the
Control Unit to the Control Panel Assy
FIG. 11-1a
FIG. 11-1b
FIG. 11-1c
3
Remove the (5) Internal Hex screw
which secure the Control Panel Cover.
4
Remove the (4) Internal Hex screw which
secure the Control Panel Base Plate.
M4X20 SCREW