HARVEY Axminster Trade AT220TSM, Manual, Page: 25 / 48

- 23 -
The default program checking code is : “CRC32: 9AF9F1E3”.
7.1.2.3 Height adjustment (Manual control)
After touch the Height Adjustment key, a separate control window will show on the right of the
display, as Fig.34. Ensure that the selector switch(G) (see
Fig.31
) is in the middle position.
Raise the spindle;
Lower the spindle;
Raise the spindle slowly;
Return to the main interface;
Fig.34
7.1.2.4 Tilt Adjustment (Manual control)
After touch the Tilt Adjustment key, a separate control window will show on the right of the
display, as Fig.35. Ensure the selector switch (G)(see Fig.31) is in the middle position.
Tilt the spindle to 90 degree;
Tilt the spindle to 45 degree;
Tilt the spindle to 90 degree slowly;
Return to the main interface;
Fig.35