HARVEY Axminster Trade AT220TSM, Manual, Page: 16 / 48

- 14 -
5.4 Installation
5.4.1 Positioning the base unit
This unit is very heavy, serious personal injury may happen if safe moving methods are
no followed! To be safe, you need assistance and power equipment when moving the
shipping crate and the machine!
Do not connect machine to electricity before installation is completed!
Main base is mounted at the wooden pallet with three bolts, take out these bolts, separate the
main base from the wooden pallet and move the main base to suitable place.
Floor required
：
(See Fig.10)
The floor must have enough loading strength for the machine weight and should be flat and level.
If necessary, fix the machine to the floor with three bolts according the foundation plan
(Fig.10).
Space required
：
(see Fig.11)
The machine should be placed at least 800 mm away from the wall.
When the main base is placed, screw the bolts A to touch the ground, then lock it.
(See Fig.12)
Fig.12 Fig.13
5.4.2. Fence assembly installation
1) Mount the guide block to the table.
(Fig.13 )
2) Install the fence by placing the main fence (A) on the table surface.
(See Fig.14)
3) Lock the fence to the table by threading the two locking handles(B) into the holes in the table
located behind the spindle.
(See Fig.14)
4) Attach the Guard Mounting Bracket (E) to the red top cover(C), then mount the bar and side
guard(F). (
S ee Fig.15)
5) Use the two locking handles (D) to lock the red top cover(C).(
S ee Fig.15)
Fig.14 Fig.15