HARVEY Axminster Trade AT220TSM, Manual, Page: 18 / 48

- 16 -
2. Install and lock the touch screen by turning the locking knob, as shown in
Fig.20 ,
3. Plug the ports "A", "B", "C" and "D" into the corresponding sockets, as
Fig.21
Fig.21 Fig.22
5.4.5. Back cover installation
Slide the back cover onto the hinges which are pointed in
Fig.22
, then lock the door with the
screws on the other side.
5.4.6 Connecting the extraction system
Dust collection device should be prepared by customer.
The dust collection equipment needs to be switched on before start the machine;
Fig.23
The outlet diameter of port
A is 100mm, see
Fig.23
The outlet diameter of port B is 100mm, see
Fig.23
The required air speed is 20m/s for vacuum dust collector. The air speed of dust collector device
(in accordance with EN 12779:2004) should not lower than 20m/s to ensure that the dust from
the machine can be exhausted. User must wear dust-proof mask.
Required air flow:1500 m³/h;