21 |
P a g e
Press Cancel
to return to the Applications
Folder.
Press
to display available Options.
Options
(select using key pad numbers)
1.
Return to parameter 1 screen (step 1 above).
2.
Print data on the results screen via selected
method.
3.
Print all the data.
4.
Set the t
0
position (starting point for the slope and
dA calculation) at the current cursor position.
Value is retained for subsequent samples.
5.
Set the t
n
position (finishing point for the slope
and dA calculation) at the current cursor position.
Value is retained for subsequent samples.
6.
Toggle the calculated slope line on and off.
Note: if any data points enclosed by t
0
and t
n
are
beyond the range of the instrument (>2.5A or <-
0.3A) then this option is greyed out.
7.
Sample number – add a prefix to the sample
number and reset the incrementing number to
the desired value.
8.
Save method – use the left and right arrows to
select a folder to store in (Favourites/Methods 1-
9), press the down arrow and enter name.
9.
Auto-print – toggles auto-print on/off.
Exit options by pressing
or wait.
