14 |
P a g e
Step 6
Select whether or not to adjust the name of your
sample before each new run, using left and arrow keys
to select Yes or No.
Step 7
To enter the results screen with the selected
parameters press OK
or Cancel the selections
and return to the Applications Folder by pressing
Cancel
.
Step 8 (if using a Factor or using a Negative Factor
Mode)
Insert the reference. Press the reference key
.
This will be used for all subsequent samples until
changed.
Step 9
Insert sample and press
.
Step 10 (if using Standard mode)
Insert the reference. Press the reference key
.This will be used for all subsequent samples until
changed.
Press
to display the Run Standard screen.
Run the standard by pressing
or press cancel
to return to the measure screen.
Step 11
Insert the sample and press
.
The concentration of the sample is displayed. Results
shown as ---- indicate the concentration is out of range.
Repeat step 11 for all samples.
