Propeller Owner’s Manual
139
INSTALLATION AND REMOVAL
61-00-39
Page 3-6
Rev. 17 Apr/20
HC-( )3( )F-7( )
• Torque wrench adaptor (Hartzell Propeller Inc.
P/N AST-2917)
• 5/8 inch deep well socket
• 1-7/16 inch crowfoot wrench
B. Consumables
• Quick Dry Stoddard Solvent or Methyl-Ethyl-Ketone (MEK)
• Anti-Seize Compound (MIL-PRF-83483)
C. Expendables
• 0.032 inch (0.81 mm) Stainless Steel Aircraft Safety Wire
(Alternate: 0.032 inch [0.81 mm] aircraft safety cable and
associated hardware)
• O-ring, propeller flange (
Refer to Table 3-1)
• O-ring, for HC-B(3,4)( )W-3( ) spacer (
Refer to Table 3-1)
2. Pre-Installation
A. Inspection of Shipping Package
(1) Examine the exterior of the shipping container, especially
the box ends around each blade, for signs of shipping
damage.
(a) If the box is damaged, contact the freight company
for a freight claim.
(b) A hole, or tear, or crushed appearance at the end of
the box (blade tips) may indicate that the propeller
was dropped during shipment, possibly damaging
the blades.
1
If the propeller is damaged, contact Hartzell
Propeller Inc. Refer to the section, “Hartzell
Propeller Inc. Contact Information” in the
Introduction chapter of this manual.
