INSTALLATION AND REMOVAL
61-00-75
Propeller Owner’s Manual
175
Page 3-72
Rev. 1 Jun/11
CAUTION
:
DO NOT PUT THE BLADE PADDLE
IN THE AREA OF THE DE-ICE BOOT
WHEN APPLYING TORQUE TO A BLADE
ASSEMBLY. PUT THE BLADE PADDLE IN
THE THICKEST AREA OF THE BLADE,
JUST OUTSIDE OF THE DE-ICE BOOT.
USE ONE BLADE PADDLE FOR EACH
BLADE.
(33) Using the paddles, simultaneously rotate the blades
toward low pitch until the start lock pins engage the start
lock plate.
(34) If the propeller is equipped with an ice protection system
that uses components supplied by Hartzell Propeller
Inc., applicable instructions and technical information for
the components supplied by Hartzell can be found in the
following publications available on the Hartzell web site
at www.hartzellprop.com.
(a) Manual 180 (30-61-80) - Propeller Ice Protection
System Manual
(b) Manual 181 (30-60-81) - Propeller Ice Protection
Component Maintenance Manual
(c) Manual 182 (61-12-82) - Propeller Electrical De-ice
Boot Removal and Installation Manual
(d) Manual 183 (61-12-83) - Propeller Anti-icing Boot
Removal and Installation Manual
(35) Propeller ice protection system components not
supplied by Hartzell Propeller Inc. are controlled by the
applicable TC or STC holder’s Instructions for Continued
Airworthiness (ICA).
OBSOLETE PROPELLER MODELS. SEE COVER PAGE
WARNINGS AND SERVICE BULLETIN HC-SB-61-331
