HAVE A QUESTION? CALL THE HART HELP DESK at 800-252-2818, or EMAIL US AT [email protected]
END AUDITOR SCANNING SESSION
END AUDITOR SCANNING SESSION
When an Auditor has completed their
scanning assignments, they should log
out and return the scanner to the Control
Desk.
At the Enter Item screen screen
press
the Logout button
on the TouchScreen
to log out, and the scanner will return to
the Enter Employee ID screen.
NOTE: If there are any Pending item
#s (P...) in the scanner
(for
example, Employee is logging
out while out of range of the
access point)
the scanner
must be brought back into
range before the Employee
can log out.
CLOSE OUT SCANNER
CLOSE OUT SCANNER
If a scanner is not needed again for this
AUDIT,
the scanner must be closed
out.
1.
From the Enter Employee ID screen,
press the Close Scanner
button
,
on
the TouchScreen to close the scanner.
2.
From the scanner instructions. The
scanner will return to the Scan Hart ID
screen.
Page - 12
