Uncontrolled when printed
–
Version 2
Rivet the pole into the centre pocket of the sheet from underneath,
riveting through the line of black PVC tape into the Centre Pole. Place
a final rivet on the very end of the centre pole pocket on the TOP of
the sheet through the black PVC tape.
Rivets on the underneath of the sheet should be fitted at even
intervals keeping to a rough guide of 30cm / 1 foot per rivet.
For ease of installation we recommend rolling the sheet up before
lifting onto the domes.
Also ensure the sheet will be the correct way round for the
customer’s
desired fixing side.
Draw a horizontal line along the body top rail of the vehicle to be
used as a sheet fitting guideline. If the rail is flat then you should
mark 2” down. If the rail has a taper you should mark 5” down
including the capping.
Fix the sheet along the line using tek bolts. This should start at 1½”
from the front of the front dome.
