Uncontrolled when printed
–
Version 2
Fix the ratchet buckles at the front and rear of the vehicle using bolts.
Fit them as near to the front and rear as possible.
To accommodate the webbing retaining straps around the side pole,
cut three holes in the side pocket. One above each of the ratchet
buckle positions and one centrally.
Slide the aluminium side pole into the side pocket of the sheet. At
each cut out hang ‘D’ ring straps with a loop from the pole. Pop
-rivet
the side pole to the sheet using short rivets. Feed the strap into the
ratchet. Clip pull strap to centre strap.
Fix the handle brackets to the body at suitable positions using tek
bolts. This is subject to your order containing the handle bracket kit.
