ASSEMBLY & MAINTENANCE INSTRUCTIONS
PAGE 8
BOL110, BOL710
BOL710, BOL102
ASY109 (SCREW IN 1st)
13 U
sing a spirit level, level the
goal up on the centre post, then
raise the crossbar and upright
up and insert the appropriate
bolt s into place.
If one of the front hinges does
not go in release the back hinge
arm and gently tap up or down
to allow front hinge to align.
Note: before aligning the
frame up move the side
f r a m e s
t o
t h e
r e q u i r e
position.
STEP LADDERS ARE REQUIRED FOR
THIS PART OF THE JOB.
(SPIRIT
LEVEL
ON
THIS
POST)
14: N
ext attach the back board (2 people required) place a BOL710 washer onto the swivel
hinge plate on each side. Gently place the backboard in between the two swivel plate, then
place the second BOL710 washer in between the top hinge plate and the hinge tube. Slide the
hinge bolt ASY110 with BOL710. Now tighten up using BOL710 & BOL102 (note do not over
tighten as the hinge has to move. Repeat this for both sides.
BOL710 X2
ASY110
BOL710 x2
BOL102
FEP108
FEP164
FEP082 X1
FEP170 X2
15: N
ow move the goal to the left and to
the right in the closed position to make
sure you are happy with the setup.
If not make minor adjustments until
happy.
