4: n
ow remove the channel from the
side boards, as you will need to
attach it to FEP164. Unscrew using
the 4mm allen keys supplied with
the bolt pack.
R
emove channel this end
FEP160, FEP173, FEP168/169
With slot facing inwards
Channel from sideboard
BOL275, BOL202
BOL285, BOL202
BOL285, BOL712, BOL202
5: C
onnect FEP164 to the channel that was
removed from the hockey side boards with
FEP160 and bolt together using the bolts as listed
to the right.
make sure that the label is on same side as
the channel once bolted onto the upright.
Note:
FEP164
6:
Slide the Bottom Internal Adjuster Arm FEP105
OR FEP171 OR FEP165 into the Bottom Outer
Adjuster Arm FEP160 OR FEP173 OR FEP168 OR
FEP169.
Then bolt into place using BOL702 & BOL331.
7: N
ow bolt the hockey side board onto the upright, by sliding the board back into the channel
making sure that the carpet is facing the same way as the slot on FEP160, FEP173, or
FEP168/169 and then bolt it up using the bolts that you removed in step 4. Then tighten up
using the allen keys supplied.
FEP064 OR FEP065
FEP166 OR FEP167
FEP164
BOL285 x2
BOL712 x4
BOL202 x2
8: P
lace either FEP064, FEP065 or FEP166/167 into
the top of the upright FEP164 as shown on the right.
Then bolt into place using the bolts as shown on the
right.
That the capped end faces the same way as the
side board, and the slot faces the same way as the side
board carpet.
N
ote:
9: O
nce everything has been bolted together, slide either FEP316 or FEP320 into FEP064 or
FEP065 then bolt up using BOL702, BOL757 and BOL331.
PAGE 6
ASSEMBLY & MAINTENANCE INSTRUCTIONS
BOL331
BOL702
BOL757
FEP064 /
FEP065
BOL316 /
FEP320
Note:
BOL757 M10 Nord Lock
Washer S/S is only used on the
Top Adjuster Arms to prevent the
BOL331 becoming loose
