BAR-003, BAR-004, BAR-005
INS003
Revision 0
Code:
Product:
4
1
2
1
Using scissors (Do not use a knife), remove all the packaging and Identify the parts using the Pack Contents and Fig.
1 overleaf.
2
Place the upright (1) into the socket, ensuring it inserts fully.
3
2
1
3
Using an 8mm allen key, loosen the grub screws in the elbow clamp (3). Place the elbow clamp on the end of the
hand rail (2) as shown in Fig. 2.
4
Slide the elbow clamp over the upright, ensuring the handrail sits on top of the upright inside the clamp. Tighten the
grub screw that holds the hand rail in place. Other configurations (BAR-004/BAR-005) can be inserted to
lengthen/corner the barrier system. Once all the handrails are in place, tighten all the lower grub screws, fixing the
uprights to the clamps.
Insert other barrier
configurations
5
Loosen the grub screws on a Long Tee Clamp (4). Insert a hand rail into a Long Tee Clamp (4) until it fills half of the
clamp, as shown in Fig. 3. Tighten the grub screw to ensure the clamp is held in place.
Fig. 3
Internal View of
Hand rail/Upright
6
Place the Long Tee Clamp onto the upright, as shown in Fig. 3, ensuring the hand rail sits on top of the upright.
When adding another section to the system, ensure the next hand rail meets with the previous one to keep equal
spacing.
Fig. 2
3
2
2
4
1
4
2
Spectator Barrier System and Advertisement Mounts
(Optional)
