Chapter 8
Maintenance
66
175-100423-00
4
Secure the drive to the carrier with four M3 flat-head screws included in the HDD bag of your accessory
box.
Figure 8-7
Drive Tray with SSD or Spinner.
5
Insert the drive and drive carrier into its bay vertically, keeping the carrier oriented so that the release
button is on the right side. When the carrier reaches the rear of the bay, the release handle will retract.
6
Push the hard drive into the hard drive bay until the hard drive clicks into the locked position.
Replacing a RAID 1 Boot Drive
If a boot drive is bad, a message appears indicating that there is a RAID Access Failure. Refer to
Figure 8-8
.
Figure 8-8
Drive error
Do the following:
a
Step 1
on page 65 thru
Step 6
. Refer to
Hard Drive Removal or Replacement
on page 65.
b
Continue on
Step 1
on page 57 thru
Step 10
on page 59. Refer to
Rebuilding a RAID 1 Boot
Drive
on page 57.
Summary of Contents for NXAMP3801HDI
