Harris NXAMP3801HDI, Hardware Installation And User'S Manual

Page: 40 / 76

Chapter 4
Connector Pinouts
40
175-100423-00
How to Wire Your NEXIO Weidm ü ller Male Connectors
1 Using a wire stripper, remove no more than 5/16”
of the wire installation from each of the required
wires. Refer to
Figure 4-3 .
2 Make sure the installation is clean-cut with no
frayed or ragged edges, trim if necessary.
3 Retwist strands by hand, if necessary, to restore
the natural lay and tightness of the strands.
4 To wire the Weidmüller GPI Connector , refer to
Figure 4-1 on page 38 or Figure 4-2 on
page 39 and Figure 4-5 :
a Insert a flat blade 3/32” screwdriver into the
Weidmüller connector.
b Insert wire into the connector.
c Remove the flat blade screwdriver.
d Repeat step a thru step c for each additional
wire.
Figure 4-3 Stripped wire installation length
Figure 4-4 Weidmüller pin callout
Figure 4-5 How to insert wire into Weidmüller
connector