Harris NEXIO AMP NX3801HDX, Hardware Installation And User'S Manual

Page: 98 / 140

Chapter 4
Using NEXIO Config
88
©2011 Harris Corporation. All rights reserved.
2 In the Selected list, click the code that you do not want to include in the Debug
String and click < to move it back to the Available list.
Tip Click >> to move all of the codes to the Selected list. Click << to move all of the
codes to the Available list.
All codes that appear in the Debug String are included in the errlog.txt file.
3 In the Number of days to keep logs list, select the number of days that you want
the logs to be saved.
Tip It is recommended that you select a minimum of 3 days to keep the logs so that
they are saved through the weekend.
4 In the Size of log files list, select the maximum size in kB for the log files.
Tip It is recommended that you select at least 32000 kB for the log files.
5 In the CheckDisk area Interval list, select the desired time (in seconds) that you
want between LLM integrity checks (i.e., 15, 30, 60, 120, 340).
When CheckDisk is added to the Debug String, the CheckDisk area becomes
available. The LLM performs an integrity check on the FAT table held in RAM at the
selected time interval.
6 In the SaveDisk area:

In the Interval list select the desired time (in seconds) that you want between
FAT snapshots (i.e., 900, 1800, 3600, 7200).

In the Files list select the desired number of files that you want to save in the
snapshot (i.e., 3, 4, 5, 6, 7, 8, 9, 10).