TV 40
TV 40
14
15
Hydraulic System
•
The hydraulic system of the TV40RE
is filled at the factory with Crown AW
46 hydraulic oil that has an ISO of 46.
•
The TV40RE has a 10 micron, beta
rated hydraulic oil filter designed for
long life.
The following list of hydraulic fluids are com-
patible and can be mixed with Terresolve hy-
draulic fluid. However, mixing these hydraulic
oils could reduce the biodegradability of the
oil in the system. For warm environments,
it is suggested that a fluid with a viscosity
of ISO 68 be used. MIXING OTHER OILS
THAT ARE NOT INCLUDED ON THIS LIST
COULD CAUSE GELLING AND DAMAGE
TO THE HYDRAULIC COMPONENTS. If
another type of oil is desired, then the system
must be completely drained and flushed first.
Appropriate replacements:
ISO 46:
Recommend for running in ambient
air temperatures of 32°F-110°F, and it con-
tains a kinematic viscosity rating around 46
cSt at 40°C. (1cSt = 1mm²/s)
•
Mobil DTE 25
•
Mobil DTE 15M
•
Amoco Rykon Premium Oil ISO 46
•
Chevron Rykon Premium Oil ISO 46
•
Conoco Hydroclear AW MV 46
•
Exxon Univis N 46
•
Pennzoil AWX MV 46
•
Shell Tellus T 46
•
Texaco Rando HDZ 46
3. Broom Bearings, Pivot Arms & Wheel
The grease zerks located on the ends of
the broom shaft, the pivot arms and the
caster wheel should be greased every 10
hours. The pivot arm grease zerks are
accessed through a hole in the frame.
4. Ratchet Jack
There are two grease zerks on the ratchet
jack that should be greased annually.
Service & Maintenance.
Grease Locations
1. Hopper Door Latch Mechanism
The two latches and three shoulder bolts
should be periodically oiled to prevent
rusting and ensure proper operation.
2. Blower Shaft
The two grease zerks located on the shaft
bearings should be greased every 10
hours. To access these bearings the front
safety shield must be removed.
