TV 40
TV 40
Specifications
Control Identification
4
5
HOPPER
HYDRAULIC
RESERVOIR
BROOM MOTOR
AIR RETURN
OIL COOLER
HYDRAULIC
PUMP
Hopper*
– The hopper stores up to 4 yards of
material.
Broom Motor*
– The broom motor turns the
broom clock-wise, throwing material forward
and upward into the air stream.
Air Return*
– Allows air to be put into the
‘recirculating’ effect which is common feature
among all Turbo Vacs.
Hydraulic Reservoir
– The hydraulic reser-
voir on a TV40RH has a 20 gallon capacity.
Hydraulic Pump
– The hydraulic pump on
the TV40RH is directly attached to the tractor
PTO.
Blower Housing*
– Surrounds the fan and is
covered on the inside by a plastic liner.
Dump Cable*
– Releases the hopper door.
Oil Cooler
– The oil cooler prevents the
hydraulic oil from over-heating. Always keep
the fins free of debris.
Debris Flap*
– Helps to keep vacuum
concentrated to the ground and to direct the
material from the broom into the suction.
Broom (optional)*
– Assists material from
the turf into the suction of the blower.
Jack Stand*
– Supports the front of the Tur-
bo Vac when it is not connected to a tractor.
During operation, the jack stand must be up,
with the wheel removed and in the transport
location.
* Denotes common features of both the
TV40RE
and
TV40RH
DEBRIS
FLAP
BLOWER
HOUSING
JACK
STAND
BROOM
DUMP
CABLE
(TO TOW VEHICLE)
Safety Features
Minimal dust generated, quiet operation - 90 dB
Blower Drive
Hydraulic motor powered by PTO pump
Blower Fan
25” diameter abrasion resistant steel with replaceable poly-liner
1 1/2” shaft with self-aligned bearings
Blower Discharge
Access plate for inspection and easy liner replacement
Airflow
Re-circulated air system
Brush Drive
Hydraulic motor direct drive
Engine
PTO, gearbox pump
Hydraulics
PTO driven
Hydraulic Oil
Crown AW 46; ISO 46 Hydraulic Oil
See service schedule
Main Frame
11 gauge welded and reinforced steel tubing
Bearings
Greaseable bearing and sealed bearings
Hopper Capacity
4 cubic yards
Wheels/Tires
4-bolt wheels, 18 5 x 9.5 tires
Controls
Blower & brush controls on machine
Sweeper
52” single sweeping head that follows the terrain with side mount-
ed gauge wheels,rises to transport position, and lowers to oper-
ating position by handle located on the side; Brush and Rubber
Fingers
Options
Curb brush and remote hose attachments.
Discharge
Mechanical trip and latch system
Tongue and Hitch
Adjustable tongue functions as pick-up height controller
Paint
Durable 2-part polyurethane
Dimensions
135” L x 64” W x 82” H
Weight
1600 lbs. - 730 kg
NOTE
:
Following publication of this manual, certain changes in standard equipment and/or options may
have occurred which would not be included in these pages. Your Harper dealer is the best source for up-to-
date information.