37
REMOVING/INSTALLING HARNESS
USING CHILD RESTRAINT IN BOOSTER MODE
(WITHOUT INTERNAL HARNESS)
1. Open chest clip and harness buckle.
2. Face the rear of the child restraint
and remove the harness straps
from the splitter plate ❶.
3. Pull
the
up-front
harness
adjustment strap as far as it will
go. This will lock the splitter plate
into the base of the seat ❷.
4. Roll strap tightly, secure roll with
an elastic band and store rolled
strap under the fabric seat pad
in the opening of the up-front
adjuster.
5. Pull shoulder straps out of their
respective slots in the backrest
❸. Slide both ends of the chest
pads and chest clips off the
harness straps.
6. Push remaining harness and
harness clips down through the
seat base ❹.
7. Lift seat base fabric to expose the
crotch buckle. Remove the crotch
buckle by turning the strap and
lifting the metal plate out of the
child restraint ❺. Store buckle
for future use.
❶
❷
❸
❹
