Harmony eXLhoist, User Manual

Page: 181 / 228

eXLhoist Configuration Software
EIO0000001505 12/2014
181
NOTE: If you do not enter the correct project password, the project is nevertheless opened in
“Locked” mode. In this mode, only the Device Identity tab content is displayed.
4 If the configuration in the Remote Device has a transfer Configuration File password, a window
is displayed.
Enter the Transfer Password
( see page 183 ) with the keyboard of the PC.
Click Enter .
5 Wait during the transfer.
Note: A progress bar is displayed during the transfer.
6 If the project file is locked, a window is displayed.
Enter the project password
( see page 184 ) .
Click Enter .
The project window is activated.
Step Action