Harmony eXLhoist, User Manual

Page: 127 / 228

Using The Wireless Remote Control System
EIO0000001505 12/2014
127
Wireless Remote Control System In START Mode
Remote Device:
Base Station:
Release
To leave the START mode:

You can go to STOP mode ( see page 123 ) .

You can go to E-STOP mode ( see page 121 ) .

The Wireless Remote Control System goes automatically to STOP mode when no button
pressed for more than the configured time-out (standby time-out).
Specifics Information
You can configure the optional start sequence and the Horn duration during start in the eXLhoist
Configuration Software
( see page 191 ) .
Reference Description
ZART8L

The START LED is ON.

The E-STOP LED is ON.
ZART•D

The START mode symbol is displayed.

The E-STOP LED is ON.
Element Description
Relays

The safety relays are ON.

The motion/auxiliary relays are enabled.

The “Radio link” relay is ON.

The “Safety relay image” relay is ON.
LEDs

The STATUS LED is blinking.

The POWER LED is ON.

The COM LED is blinking.