LAH Series Manual
C o n t e n t s
I Technical Information
1.
Features and configuration of linear actuator
1-1 Features ······························································· 1
1-2 Configuration ·························································· 1
2. Specifications
2-1 Actuator specifications ················································· 2
2-2 Encoder specifications ·················································· 3
3. External drawing
······························································· 5
4. Accuracy
······································································· 5
5. Performance evaluation system and evaluation method
5-1 Performance evaluation system ··········································· 6
5-2 Performance evaluation method ··········································· 7
6. Mechanical characteristics
6-1 Permissible loads ······················································ 9
6-2 Axial rigidity of output rod ··········································· 9
6-3 Life ··································································· 9
II Operation Manual
1. Inspection during unpacking ···············································
10
2. Notices on handling ························································
10
3. Design and operational precautions
3-1 Operating environment ··················································· 10
3-2 Mounting direction of linear actuator ··································· 11
3-3 Mounting method of linear actuator ······································ 11
3-4 Load conditions and moving toward pulling direction ····················· 11
3-5 Hardness of contact surface on workpiece ································ 12
3-6 Operational precautions ················································· 12
3-7 Overall limit stroke ···················································· 13
3-8 Limit switch ···························································· 14
3-9 Output rod continuous fine operation ···································· 14
4. Cables
4-1 Motor cables and output rod movement directions ·························· 15
4-2 Encoder cable colors ··················································· 15
4-3 Handling cables ························································ 15
4-4 Extension cable for motor ··············································· 15
4-5 Extension cable for encoder ············································· 15
