LAH Series Manual
- 10 -
II Operation Manual
Please be sure to read this operation manual before using this product. If you have any concerns or comments about this
product, please contact your dealer or our sales office.
1. Inspection during unpacking
When you receive the linear actuator, please check the following points.
◆
You received the product you had ordered.
◆
The product was not damaged during transport.
◆
No looseness in fasteners.
◆
Special order parts are included.
If you have any other concerns, please contact your dealer or our sales office.
2. Notices on handling
When handling a linear actuator, follow the general rules below.
3. Design and operational precautions
This product is a high-precision positioning linear actuator. When this product is not used properly or used under
undesirable operating conditions, performance cannot be sufficiently achieved. Also, the product life may be shortened
or other problems may occur. Please observe the following precautions.
3-1 Operating environment
Use the linear actuator under the following environmental conditions.
◆
Indoors
◆
Ambient temperature:
＋
10 to
＋
25
℃
The temperature fluctuation of each operating temperature is recommended to be within ±1
℃
for more stable
accuracy of the linear actuator.
◆
Ambient temperature: 35 to 80%RH (no condensation)
◆
Vibration: 19.6 m/s
2
or less (2G or less )
◆
No contamination by water or oil
(If there is a possibility of contamination by water or oil, cover the actuator. )
◆
No corrosive, explosive gas, or dust
◆
Never disassemble the linear actuator. If you disassemble the actuator or
loosen the screws, the performance is significantly decreased and the
original performance is no longer guaranteed.
◆
Do not apply any impact on the linear actuator. Doing so may result in
failure, lower accuracy, or abnormal sound.
CAUTION
