Chapter 7
Operations of teach-box
HA-675_V3_02
- 123 -
●
Entering and erasing command data
◆
Selecting a command to input data
Two ways are provided to select a command for data input
in the [program mode] or in the [parameter mode].
(1) By cursor:
place the cursor on the command
by the [
↑
][
↓
] keys.
(2) By command keys: press the relating command key
like the [SPD] key. The cursor
moves to the corresponding
command.
◆
Entering and defining data
(1) To enter the data to the command under the cursor,
press numeral keys.
⇒
Every pressing shifts the cursor rightward.
(2) To define newly entered data, press [ENTER] key.
⇒
The data is defined and stored in the HA-675
driver.
◆
Canceling the data entering
(1) To cancel the data entering and recover the previous
data before defining the entering data, press
[CANCEL] key.
◆
Correcting the entered data
(1) To correct the entered data, press [
-
] and [ENTER] keys in the sequence.
⇒
The entered data is erased.
(2) After the erasing old data, enter the correct data.
◆
Erasing defined data
(1) To erase the all defined data of the indicating
address, press [DEL] key.
⇒
The indication of [ERASE OK?] shown in the
figure to the right will appears.
(2) Press [ENTER] key to erase them.
⇒
All data of the address are erased.
(3) To cancel the erasing, press [CANCEL] key.
Note: It is impossible to erase addresses. Set [NOP]
command for it.
◆
Erasing all defined data
(1) To erase all defined command data, press [ERASE
ALL] key.
⇒
The indication of [ALL ERASE OK?] shown in
the figure to the right will appears.
(2) Press [ENTER] key to erase them. All defined data are erased. The erasing may spend around
five seconds. Do not carry out any other key operation until the end of erasing.
(3) To cancel the erasing, press [CANCEL] key.
●
Warning
sound
If you get warning sounds while entering data, quit entering and reenter the correct data.
Long [peeee] sound: sounds for the data exceeding its limit.
Short [pee] sound:
sounds for unacceptable keying to be neglected.
SON
ABSCLR
ABSREQ
ESTP
DENB
Defining
entered data
Entering
numerals
Canceling
data entering
ERASE OK ?
DSET pps pls No 00
ALL ERASE OK ?
DSET pps pls No 00