AL815CC, AL825, AL825CC, AL835 Hybrid Installation & Owner's Manual 2017
9
TEC00037 2016FEB20 P/N: 630-00053 Rev A
SECTION 1 : OWNER
Safety & Maintenance
Safety & Maintenance
CAUTION
Do NOT operate this lift until your
dealer/installer has clearly instructed
you in its proper operation.
Safety
Your truck lift has been engineered and designed for
years of trouble-free use. However, like all mechanic
equipment, everyday use may result in some parts
becoming damage or worn.
IMPORTANT: Check regularly for any worn, loose
or damaged parts on your lift. If you observe any
issues, do NOT use the lift. Contact your dealer or
installer to make repairs. Failure to act may result
in severe injury.
Use your lift only to load and unload the scooters
and power chairs for which it is designed. Do NOT
add or modify any part of the lift system without
first contacting the lift manufacturer. Modifications
may void any warranties as well as affect the
structural integrity of the lift.
WARNING
Always check the lifting straps
before each use for damage or
wear.
Make sure the vehicle’s parking brake is firmly set
before operating the lift.
Ensure that the lifting strap is secure and taut and that
it points straight down before lifting the scooter or
power chair. Failure to do so could result in the scooter
or chair swinging toward the operator of the vehicle.
When using the lift, keep your hands and feet from
under the scooter or power chair as it is being loaded
and unloaded.
CAUTION
The rotational motor is equipped with
a Manual Override in case of a power
failure.
To use override, disconnect
power before removing cap.
This
prevents accidental restoration of
power and serious injury.
Ensure that the scooter or chair is firmly sitting on the
vehicle’s floor and is not suspended by the lift. If the
scooter or chair is not firmly on the truck bed floor, it
may move during transportation and cause damage
to the lift, scooter / chair, vehicle, or passengers.
Maintenance
This Truck Lift is designed to be as trouble-free as
possible, but as with any mechanical device, regular
maintenance will help ensure that it continues to offer
reliable and safe use for years to come.
Schedule a preventative maintenance inspection.
Have your dealer inspect the lift at least once a year,
including motors, lift frame, wiring harness, and all
moving parts.
Check for paint chips and touch up bare metal. Use
a good gloss black enamel or lacquer to inhibit rust.
You may need to do this more frequently if your lift is
subject to salt air, road salt, or debris.
Always check lifting straps before use. If you notice any
wear or fraying, do not use the lift. Contact the installer
or dealer for repair. Failure to act may cause damage to
the vehicle or severe injury.
Do not expose hand control units to the weather.
If the cab entry wiring harness is not installed, and
the control is connected directly to the lift, remove
the hand control each time the lift is used; it should
never be exposed to the elements. If your lift did not
include the cab entry wiring harness, contact Harmar’s
technical service department or your dealer / installer
to have one installed.
