AL-065 OPERATION
POST
ARM
ASSEMBLY
MOUNTING FLANGE
& ARM / BASE
OPEN TRUNK OR CARGO DOOR
INSERT POST INTO ARM / BASE
PLACE ARM ASSEMBLY ONTO POST
MANUALLY ROTATE
FRAME ARM TO
OUTSIDE OF VEHICLE
INSPECT LIFTING STRAP
PRIOR TO EACH USE
CONNECT POWER
TO LIFTING MOTOR
LOWER
STRAP
TO CHAIR’S
HEIGHT
PARK CHAIR
CLOSE TO
VEHICLE
KEEP HANDS AND FEET FROM UNDER THE SCOOTER
OR POWER CHAIR AS IT IS BEING LIFTED
FOLD SEAT
BACK DOWN /
TAKE SEAT OFF
ATTACH
DOCKING DEVICE
OR
ATTACH LIFTING
HOOK TO DOCKING
DEVICE
ENSURE THE LIFTING STRAP IS SECURE AND THAT IT
POINTS STRAIGHT DOWN. FAILURE TO DO SO COULD
RESULT IN THE SCOOTER OR CHAIR SWINGING
CAUSING DAMAGE TO OPERATOR OR VEHICLE
STOP LIFTING BEFORE THE STRAP HOOK CONTACTS THE STRAP
ROLLER MOUNTED ON THE LIFTING ARM. CONTACT WILL DAMAGE
THE LIFT. A PROPERLY ADJUSTED LIFT WILL AVOID THIS
MANUALLY
ROTATE
ARM INTO
VEHICLE
LOWER CHAIR
INTO VEHICLE
RAISE CHAIR
ABOVE BUMPER
REMOVE HOOK
FROM DOCKING
DEVICE
ELIMINATE EXCESS STRAP BY PRESSING THE “UP” BUTTON
UNTIL THE HOOK IS ABOUT 1 INCH FROM THE TOP OF THE LIFTING ARM
IF PREPARATIONS ARE NEEDED TO SECURE THE SCOOTER OR CHAIR
FOR TRANSPORT SUCH AS PARKING BRAKES OR WHEEL CHOCKS,
THE DEALER SHOULD INSTRUCT OPERATORS ON HOW.
DUE TO THE WIDE VARIETY OF SCOOTERS, POWER CHAIRS, AND VEHICLES,
YOUR DEALER MAY OFFER A DIFFERENT METHOD FOR LOADING AND UNLOADING
YOUR SCOOTER. PLEASE FOLLOW THE GUIDELINES THEY HAVE OFFERED
UNLOADING IS THE REVERSE OF LOADING
TRAVEL w/ LIFT ASSEMBLED
TRAVEL w/ LIFT ASSEMBLED
UN-ASSEMBLE / STORE INSIDE
UN-ASSEMBLE / STORE INSIDE
ALWAYS DISCONNECT POWER
TO LIFTING MOTOR BEFORE TRAVEL
OR
STRAP HOOK
TO MOUNT FLANGE
RUN STRAP UP TILL TIGHT
REMOVE ARM
ASSEMBLY &
POST AND STORE
TRUNK OR
CARGO
AREA
10
